Convert your pressure washer into a sandblaster with the Sandblaster Kit!
Sandblaster attachments shoot out abrasive material at very high velocity to remove paint, dust and dirt. The Sandblaster Kit from Karcher is suitable for removing old paint or rust, making it ideal for sand blasting or grit blasting.
How the Sandblaster Works
Pressure from your pressure washer is used to propel sand at the object to be blasted. The more pressure means faster travel and a more abrasive action which ensures sand works to force the topcoat off an object, whether it is paint, grease, or rust.
The Sandblaster Kit uses fine kiln dried sand to remove all manners of stubborn dirt on the wall, concrete floor or a variety of metallic surfaces. It is advised to use a sand which has a grade between 0.25–1.2 mm, as anything larger could cause damage or a fault to the attachment or your pressure washer.
Simple to use
The clear tube runs into a bucket of sand, the sandblaster is then connected to your pressure washer gun and once the trigger has been pressed water jet comes through the sandblaster all while drawing sand out from the bucket.
Superior material
Hardened ceramic core for wear-resistant and long terms of use, brass nozzle and aluminum spray wand for durable and anti-corrosion.
Specification
- For K2 – K7 pressure washers
- Temperature is up to 140°F/60℃.
- Working pressure of pressure washer attachment is up to 180bar/ 2600psi
- Dry silica sand, baking soda, or cleaned and dried river sand are the materials used by pressure washer sandblasting attachments.
- Note: After work, please dry the cleaned goods as soon as possible, otherwise they will rust again the next day.
Package Includes
- Sand blaster Nozzle (with Top quality ceramic core), Max 180bar/ 2600psi
- 18” / 46cm Water Spray Wand
- 10” / 26cm Sand Intake Wand
- 10’ / 3m Siphon Hose
Note one of the bags of dried sand I bought was obviously NOT dried properly and did not work. Swapped it for proper dried bag and it worked instantly.